Test sanitizer and pH using your SNAP Test Strips. If necessary adjust pH to 7.2 - 7.6. If sanitizer level tests below 1.0 ppm slightly open your feeder to maintain a 1.0 - 1.5 ppm sanitizer level.

Add SNAP CLEAR once a week by carefully filling the feeder per the manufacturers directions. If the feeder is not a floating type, turn off the pump before opening the feeder and stand to the side when removing the lid.

Add SNAP CLEAR at the rate of one half container per 10,000 gallons of pool water once a week. With the pump running, broadcast.

Add SNAP CLEAR into the deep end of the pool. Use a pool brush to disperse any granules which may have settled to the bottom of the pool. Swimming may resume 15 minutes after applying SNAP CLEAR.

About Our Products  |  Pool Care  |  SNAP Pool Care  |  Find Your Closest Dealer